Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model SB105/30/08/05/19/P/2B/64/DAKN, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. SB105/30/08/05/19/P/2B/64/DAKN Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
Adopt “reducing machine + frequency conversion special motor + encoder + frequency converter” to achieve precise control of stepless speed regulation at ultra-low speed. YP series frequency conversion special motor has good universality, and its installation size conforms to IEC standard, and it is interchangeable with general standard type motor. Inverter motor wiring R、S、T are inputs, U、V、W are outputs! If the motor needs to be frequency converted to operate at industrial frequency, the phase sequence of the frequency converted output U、V、W must be the same as the phase sequence of the industrial frequency input U、V、W!Principle of frequency conversion motor_Frequency conversion motor wiring The feedback line of the motor frequency converter is mainly as follows, R, S, T threeportsare respectivelythe input port of the power supply, the output port of the frequency converter is U, V, W these three kinds, they are connected to the motor respectively. When we turn on the frequency converter of the motor, we first connect the intermediate relay and the motor together to the control input common end, at this time the forward start, the normally open contact of the intermediate relay is powered because of the closing, at this time the motor is forward, ifcurrentloss, the motor will stop.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- SB105/30/08/05/19/P/2B/64/DAKN Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- SB105/30/08/05/19/P/2B/64/DAKN High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- SB105/30/08/05/19/P/2B/64/DAKN Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SCL055/15010/A/30/A0/BB/03/003 Advanced motor control technology,
SM070-60-020-P0-44-M1-B0 High precision, high dynamic response,
SH100/50030/0/0/00/00/10/10/00 | Schneider | EALU motor,
SM/100/40/080/P1/45/S1/BO | Schneider | EALU motor,
SB105/20/08/05/19/S/01/64/DAFL Brand new original | In stock supply,
SH055/80005/0/0/00/00/00/11/00 Advanced motor control technology,
SM140-30-210-P1-45-S1-B1 High precision, high dynamic response,
ISH140/30075/0/0/00/0/10/00/00 | Schneider | EALU motor,
ISH070/60022/0/1/00/0/10/11/00 Brand new original | In stock supply,
SH30701S0001066 | Schneider | EALU motor,
Reviews
There are no reviews yet.