SR058/60/005/P0/21/S1/B0/T | Schneider

SR058/60/005/P0/21/S1/B0/T | Schneider | EALU motor

Price:

Brand: Schneider/ELAU
Model: SR058/60/005/P0/21/S1/B0/T
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU Motor SCHNEIDER servo motor SR058/60/005/P0/21/S1/B0/T

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model SR058/60/005/P0/21/S1/B0/T, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. SR058/60/005/P0/21/S1/B0/T Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Which is more expensive, a synchronous motor or a frequency converter motor?　　Under normal circumstances, the price of a frequency conversion motor is higher than that of a conventional motor. This is because a frequency conversion motor needs to be used with a frequency converter, which is itself a more complexpower electronic device that requires the use of high-quality electronic components, thus making its cost relatively high. In addition, the design and manufacturing of frequency conversion motors also need to consider more factors, such as the adaptability to the power output of the frequency converter, the control of heat and noise that may be generated during the frequency conversion speed regulation process, etc., which will also affect its cost.　　On the other hand, while induction motors are relatively inexpensive, they are limited in terms of speed control and operating efficiency. If precise speed control is required or there are higher demands for energy utilization efficiency, frequency conversion motors are needed.　　It should be noted that the difference in specific prices depends on various factors such as motor model, brand, specifications, etc., and the difference will also be different in different cases. Therefore, when choosing a motor, it is necessary to consider comprehensively according to actual needs.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

SR058/60/005/P0/21/S1/B0/T Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

SR058/60/005/P0/21/S1/B0/T High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

SR058/60/005/P0/21/S1/B0/T Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.