Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model SCL055/30011/A/00/AA/AA/04/001, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. SCL055/30011/A/00/AA/AA/04/001 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
FOC motor vs traditional motorIn the field of modern industry and automation,the motoras the core component of the driving force, directly affects the efficiency and reliability of the entire system. With the development of control technology, FOC motors (field-oriented control motors) are increasingly valued for their excellent performance andhigh precisioncontrol.1. Control strategyFOC Motor:The core of the FOC motor lies in its control strategy, namely, field-oriented control. This control method decomposes the stator current of the motor into two components parallel and perpendicular to the rotor magnetic field, respectively controlling the motor”s magnetic flux and torque. This control method allows the motor”s torque and magnetic flux to be independently controlled, thus achieving more precise speed and position control.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- SCL055/30011/A/00/AA/AA/04/001 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- SCL055/30011/A/00/AA/AA/04/001 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- SCL055/30011/A/00/AA/AA/04/001 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH070/60030/0/0/00/00/00/00/00 Schneider Electric | Quick Delivery,
ISH070/60022/0/0/00/0/10/01/00 Schneider Electric | Quick Delivery,
SH32053P01F2000 Schneider Electric | Quick Delivery,
SH055/80013/0/0/00/00/00/11/00 | Schneider | EALU motor,
ISH140/30075/0/0/00/0/10/10/00 | Schneider | EALU motor,
SH140/30270/0/0/02/00/00/01/00 Schneider Electric | Quick Delivery,
SH205/40360/0/0/02/00/00/10/00 High precision, high dynamic response,
SH32053P12A2300 Schneider Electric | Quick Delivery,
SB105-40-06-05-19-P-01-64-EOKN | Schneider | EALU motor,
SH070/60010/0/1/00/00/10/01/00 Advanced motor control technology,
Reviews
There are no reviews yet.