ISH070/60017/0/0/00/0/00/00/00 | Schneider

ISH070/60017/0/0/00/0/00/00/00 | Schneider | EALU motor

Price:

Brand: Schneider/ELAU
Model: ISH070/60017/0/0/00/0/00/00/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60017/0/0/00/0/00/00/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/0/00/0/00/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60017/0/0/00/0/00/00/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Energy-saving motor; The difference between energy-saving motor and ordinary motor.Save energyMotorDifferences between energy-saving motors and ordinary motorsEnergy saving motor, usually refers to the general standard type of electric motor, is a collective term for motors with high efficiency. The standard of energy-saving motors is that the motor efficiency value can be as high as the second level of GB18613-2012 standard, and the main features are the adoption of new motor design and new processes, new materials.The advantages of high-efficiency energy-saving motors are to reduce the loss of electromagnetic energy, heat energy andmechanicalenergy, and improve the output efficiency. Compared with ordinary motors, the energy-saving effect of using high-efficiency energy-saving motors is significant, and the efficiency can be improved on average by 4%.High-efficiency energy-saving motors are characterized by the following features:1. Save energy and reduce costs2. Directly play or useinverterto adjust the speed, which can fully replace the asynchronous motor3. Some energy-saving motors can save more than 15% of electricity compared to ordinary motors.4.Energy-saving motorPower factorwill approach 15.MotorCurrentSmall, greatly extended service lifeThe above is the basic knowledge about energy-saving and efficient motors, and it is hoped that it will be helpful to the users.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60017/0/0/00/0/00/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60017/0/0/00/0/00/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60017/0/0/00/0/00/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.