Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH100/30044/0/0/00/0/00/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH100/30044/0/0/00/0/00/00/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
stepper motorA stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In non overloaded situations, the speed and stopping position of the motor depend only on the frequency and number of pulses of the pulse signal, and are not affected by load changes. When the stepper driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle in the set direction, called the “step angle”, and its rotation runs step by step at a fixed angle. By controlling the number of pulses, the angular displacement can be controlled to achieve accurate positioning; At the same time, the speed and acceleration of the motor can be controlled by controlling the pulse frequency, thus achieving the purpose of speed regulation.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH100/30044/0/0/00/0/00/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH100/30044/0/0/00/0/00/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH100/30044/0/0/00/0/00/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM070/60/020/P0/45/S1/B1 Advanced motor control technology,
SM100-40-080-P1-45-S1-B1 Schneider Electric | Quick Delivery,
SH205/20900/0/1/00/00/00/11/00 | Schneider | EALU motor,
SH100/40060/0/1/00/00/10/11/00 High precision, high dynamic response,
SM/100/40/080/P1/45/S1/BO | Schneider | EALU motor,
SH070/60030/0/0/00/00/10/00/00 High precision, high dynamic response,
ISH070/60011/0/0/00/0/00/11/00 Advanced motor control technology,
SH30701S0001071 Brand new original | In stock supply,
SH055/80005/0/1/00/11/00/10/00 | Schneider | EALU motor,
SH140/30120/0/0/02/00/00/01/00 Advanced motor control technology,
Reviews
There are no reviews yet.