Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60011/0/0/00/0/10/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH070/60011/0/0/00/0/10/00/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
The difference between AC motor and frequency conversion motorAC motor and frequency conversion motor are common types of electric motors, widely used in industry and daily life. There are some differences between them in working principle, characteristics and applications. This article will introduce the differences between AC motor and frequency conversion motor in detail, and analyze their advantages and disadvantages as well as applicable scenarios.1. Industrial Frequency MotorsIndustrial frequency motors are those that are directly supplied by an industrial frequency power source and operate at a fixed frequency (usually 50Hz or 60Hz). It is the most common type of electric motor, suitable for many fields such as factories, office buildings, and household appliances.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH070/60011/0/0/00/0/10/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH070/60011/0/0/00/0/10/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH070/60011/0/0/00/0/10/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM100/40/080/P0/45/M1/B1 High precision, high dynamic response,
ISH100/30044/0/1/00/0/00/01/00 | Schneider | EALU motor,
SB145/20/22/05/24/P/01/64/EOKN | Schneider | EALU motor,
SM-100/40/050/P1/45/S1/B1 Schneider Electric | Quick Delivery,
SH30552P12F2000 High precision, high dynamic response,
SM140-30-210-P1-45-S1-B0 Advanced motor control technology,
SH070/60020/0/0/00/00/10/10/00 Advanced motor control technology,
SB145/30/22/05/24/P/01/64/EOKN Brand new original | In stock supply,
SH100/40080/0/1/00/00/00/20/00 Brand new original | In stock supply,
ISH100/30044/0/1/00/0/00/11/00 Schneider Electric | Quick Delivery,
Reviews
There are no reviews yet.