SR058/60/005/P0/21/S1/B1/10 Brand new original

SR058/60/005/P0/21/S1/B1/10 Brand new original | In stock supply

Price:

Brand: Schneider/ELAU
Model: SR058/60/005/P0/21/S1/B1/10
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU Motor SCHNEIDER servo motor SR058/60/005/P0/21/S1/B1/10

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model SR058/60/005/P0/21/S1/B1/10, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. SR058/60/005/P0/21/S1/B1/10 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Regardless of the approach used, the primary working principle of a dual-speed motor controller is to change the voltage and frequency of the motor to achieve different speeds. At high speeds, the controller outputs high voltage and high frequency; at low speeds, the controller outputs low voltage and low frequency. The controller typically controls the motor speed based on external signals (such as from a control panel, sensor, etc.).　　The difference between a dual-speed motor and a regular motor　　The difference between a dual-speed motor and a regular motor mainly lies in the fact that a dual-speed motor can switch between two different operating speeds, while a regular motor has only one operating speed.　　Dual-speed motors generally have two sets of windings, corresponding to different pole pairs. By changing the wiring method of the windings, two different pole pairs can be achieved, resulting in two different operating speeds. Dual-speed motors can play a good role in applications where speed adjustment is required, such as fans, pumps, etc.　　DC motors, on the other hand, have only one set of windings and can therefore only operate at a single speed. If a different speed is required, it is necessary to use a speed controller or replace the motor.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

SR058/60/005/P0/21/S1/B1/10 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

SR058/60/005/P0/21/S1/B1/10 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

SR058/60/005/P0/21/S1/B1/10 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.