Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model SH30701S0001072, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. SH30701S0001072 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
2、 Control methodFOC motor:FOC motor adopts vector control method, which achieves efficient and smooth operation of the motor by accurately controlling the magnitude, direction, and phase of the motor stator current.FOC control technology can be applied to both sensory FOC and non sensory FOC scenarios. Sensing FOC detects rotor position through sensors, while non sensing FOC estimates rotor position through algorithms.BLDC motor:The control method of BLDC motor is relatively simple, usually using square wave control or sine wave control.The most representative method in square wave control is the six step commutation method, which generates a rotating magnetic field by switching the direction of current in different states. Sine wave control generates a smooth rotating magnetic field by continuously changing the magnitude and direction of the current.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- SH30701S0001072 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- SH30701S0001072 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- SH30701S0001072 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH30702S0001137 High precision, high dynamic response,
SH140/30120/0/0/00/00/00/10/00 Brand new original | In stock supply,
ISH140/30075/0/0/00/0/10/10/00 Schneider Electric | Quick Delivery,
SH055/80009/0/0/00/00/12/11/00 High precision, high dynamic response,
SH100/40060/0/1/00/00/10/10/00 Advanced motor control technology,
SM100-30-080-PO-44-S1-BO | Schneider | EALU motor,
SH140/30270/0/1/00/00/10/11/00 Brand new original | In stock supply,
SM100/50/030/P1/44/S1/B0 Brand new original | In stock supply,
SH140/30330/0/1/00/00/10/00/00 High precision, high dynamic response,
SR058/60/005/P0/21/S1/B1/10 High precision, high dynamic response,
Reviews
There are no reviews yet.