Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model SM100-50-030-P1-45-S1-B1, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. SM100-50-030-P1-45-S1-B1 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
Optimize heat dissipationWe have another way to reduce resistance, that is, to improve the motor”s heat dissipation capability. In fact, resistance is affected by temperature, the lower the temperature, the lower the resistance value. Therefore, for a motor, good heat dissipation means higher efficiency. This line of thought leads to two development directions: one is to use an external low-temperature environment to create a superconducting motor with ultra-high efficiency; the other is to strengthen the motor”s heat dissipation capability, to quickly remove the heat generated inside the motor, which is the background of the development of the thermal paste coated wire.Theoretically, we could also choose to switch to higher-quality conductive materials to reduce resistance, but this is often impractical due to the high cost. Key points summary:Four methods to improve the efficiency of a motor: one reduce loss, two reduce current, three reduce resistance, four reduce temperature.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- SM100-50-030-P1-45-S1-B1 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- SM100-50-030-P1-45-S1-B1 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- SM100-50-030-P1-45-S1-B1 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM100/50/030/P1/44/S1/B0 Advanced motor control technology,
SB105/40/02/05/19//R1/64/EOKN Advanced motor control technology,
SM100-50-030-P1-44-R1-B0 High precision, high dynamic response,
ISH070/60022/0/1/00/0/00/00/00 Brand new original | In stock supply,
SCL055/15010/A/30/A0/BB/04/003 Brand new original | In stock supply,
SH205/20650/0/1/00/00/10/00/00 Schneider Electric | Quick Delivery,
ISH140/20125/0/0/00/0/10/10/00 Brand new original | In stock supply,
SH140/30330/0/0/00/00/12/11/00 Brand new original | In stock supply,
SH31004P01A2300 Schneider Electric | Quick Delivery,
ISH070/60022/0/1/00/0/00/01/00 Brand new original | In stock supply,
Reviews
There are no reviews yet.