Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model SM100-50-030-P4-55-S1-BO, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. SM100-50-030-P4-55-S1-BO Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
The motor stops supplying power when the shaft is in the correct (ideal) position. If the shaft does not stop at the desired position, the motor continues to operate until it enters the correct direction. The desired position is transmitted by a signal line using electrical pulses. Therefore, the speed of the motor is proportional to the actual and ideal position. When the motor approaches the required position, the motor starts to rotate slowly, but the speed is very fast when the motor turns to the farthest point. In other words, servo motors only need to complete the task as fast as possible, which makes them efficient devices.Hongfeida Main Push:Honeywell thickness gauge spare parts/Schneider Aye series servodriverLXMX module, BMX module, 140/TSX module/ABBDCS module,robotspare parts,IGBTmodule board, ABB tensionsensor/SiemensRobin康 series products, flue gas analyzer 7MB, motor protector 3UF, wide temperature series module 6AG (more recommended for customers doing projects, the delivery period), software 6FC5851 6FC5852 / Rexroth servo driver motor/Fanuc servo driver motor /Yaskawa servo driver motor.1. Taking overPLC control cabinets, frequency conversion cabinets, medium and low voltage switch cabinets, and other automation integration systems for renovation, design, installation, and commissioning;2. Maintenance: servo drives, PLC modules, frequency converters, touch screens, DCS cards, etc.;3. KUKA robot maintenance and spare parts replacement.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- SM100-50-030-P4-55-S1-BO Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- SM100-50-030-P4-55-S1-BO High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- SM100-50-030-P4-55-S1-BO Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH100/30100/0/0/00/00/00/01/00 | Schneider | EALU motor,
SM140/30/290/P0/45/M1/B0 Brand new original | In stock supply,
SH070/60020/0/0/00/11/00/00/00 | Schneider | EALU motor,
SB105/40/02/05/19/S/R1/64/EOKN High precision, high dynamic response,
SH070/60030/0/0/00/00/00/00/00 Advanced motor control technology,
SH205/20900/0/1/00/00/00/11/00 | Schneider | EALU motor,
SCL055/30010/A/00/BA/AA/02/001 Advanced motor control technology,
SH070/60030/0/1/00/00/10/01/00 High precision, high dynamic response,
SH100/40060/0/1/00/00/10/00/00 | Schneider | EALU motor,
SH140/30270/0/1/00/00/10/10/00 Advanced motor control technology,
Reviews
There are no reviews yet.