ISH070/60011/0/1/00/0/10/10/00 High precision, high dynamic response

Price:

Brand: Schneider/ELAU
Model: ISH070/60011/0/1/00/0/10/10/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60011/0/1/00/0/10/10/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60011/0/1/00/0/10/10/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60011/0/1/00/0/10/10/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Closed-loop control system is used for servo motors, which monitor the actual operating conditions of the motor in real time through sensors and provide feedback to the controller. The controller adjusts the output signal based on the deviation between the feedback and the set value, ensuring that the motor operates precisely according to the predetermined requirements. Although this control method has a more complex system and higher cost, it can achieve extremely high accuracy and dynamic response, meeting the needs of high-end applications.3. Stepper motor: Precise positioning, cost-effectiveStepper motors, with their unique working principle and performance characteristics, show obvious advantages in specific application scenarios. It is driven by pulse signals, with a fixed step angle for each rotation, thus achieving accurate position control. The control method of the stepper motor is simple and the positioning accuracy is high, although it is prone to stepping loss at high speed and the output torque is relatively small, it has a wide range of applications in cost-sensitive occasions and in occasions where the accuracy requirement is not particularly high.Stepper motors are often used in printers, scanners, and smallautomated equipment. These applications require motors that can precisely control position, while also having some cost constraints. The pulse control method of stepper motors simplifies the control process, allowing these devices to reduce costs and complexity while maintaining performance.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60011/0/1/00/0/10/10/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60011/0/1/00/0/10/10/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60011/0/1/00/0/10/10/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.