Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/1/00/0/00/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH070/60017/0/1/00/0/00/00/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
Classification of tachogenerators and application of tachogeneratorsSpeed MeasurementMotoris an important device used to detect and control the speed of motor operation. It consists of a sensorthat can sense and measure the speed of motor operationas well as circuits that process this data and control the motor. Speed Measurement Motors are widely used in modern production lines andmechanicalsystems, and are an indispensable part of various mechanical equipment.Non-contact speed sensors and contact speed sensors are the two main types of speed sensors. Non-contact speed sensors measure the speed of a rotating motor by sensing the rotating magnetic field of the motor oropticalsignals. Contact speed sensors, on the other hand, measure the speed of a rotating motor by directly contacting the motor”s shaft. Both types of speed sensors have their advantages and disadvantages, and the specific choice should be based on the actual needs.Speed control motors are widely used in mechanical equipment such as automobiles, machine tools, wind turbines, hydraulic pumps, etc. In these devices, the speed control motor is generally used to control the output power of the motor to ensure the normal operation of the equipment and improve efficiency. In addition, the speed control motor can be used to detect the operation status of the motor, so as to timely detect and solve problems and ensure equipment safety.Recently, with the continuous development of industrial automation, the application of speed measuring motors has become increasingly widespread. Due to the high precision and reliability of speed measuring motors, it has become an indispensable device in modern industrial production. In the future, with the continuous progress of technology, the application scope of speed measuring motors will continue to expand.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH070/60017/0/1/00/0/00/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH070/60017/0/1/00/0/00/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH070/60017/0/1/00/0/00/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH140/30330/0/1/00/00/12/11/00 | Schneider | EALU motor,
SH205/20900/0/1/00/00/00/11/00 Advanced motor control technology,
SH055/80009/0/1/00/00/10/10/00 | Schneider | EALU motor,
ISH140/20125/0/1/00/0/10/10/00 | Schneider | EALU motor,
SB105/30/08/05/19/P/01/64/EAKN Advanced motor control technology,
SH140/30120/0/0/02/00/00/01/00 Advanced motor control technology,
SH140/30330/0/0/00/00/10/00/00 High precision, high dynamic response,
SM100/40/030/P0/44/R1/B1 Brand new original | In stock supply,
ISH140/15085/0/1/00/0/00/01/00 High precision, high dynamic response,
SM-070/60/020/P0/55/S1/B1 Schneider Electric | Quick Delivery,
Reviews
There are no reviews yet.