ISH070/60011/0/4/00/0/10/10/00 Advanced motor control technology

Price:

Brand: Schneider/ELAU
Model: ISH070/60011/0/4/00/0/10/10/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60011/0/4/00/0/10/10/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60011/0/4/00/0/10/10/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60011/0/4/00/0/10/10/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Hub motor is a common type of motor used in emerging electric vehicle technology. Its main advantage lies in a simpler mechanical structure and higher energy utilization efficiency. Due to the elimination of the transmission system, it has a lower spatial and material cost, and also has better energy recovery. Hub motors are suitable for urban electric vehicles, which are more in line with the requirements of frequent starts and stops, flexible control, range, and power in urban driving environment.　　The frequency conversion motor can control the motor speed by changingthe power frequency, which has the advantages of wide speed regulation range, high efficiency, and stable start and stop, and is suitable for occasions where precise speed regulation and high efficiency operation are required, such as fans and pumps, etc. However, thepower factor of the frequency conversion motor is low, which may affect the quality of the power grid.　　Overall, if a large starting torque and low speed are required for the application, a differential motor can be chosen; if precise regulation of the motor speed is needed and there are high efficiency requirements, a variable frequency motor can be selected.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60011/0/4/00/0/10/10/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60011/0/4/00/0/10/10/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60011/0/4/00/0/10/10/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.