9907-005 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 9907-005
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
9907-005 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 9907-005 controller debugger module Motor touch screen WOODWARD

9907-005 Woodward overspeed protector

The 9907-005 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 9907-005
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 9907-005 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Motion controllers are classified based on the nature of the controlled variable and the motion control method:

1. Position control

The position control of the motion controller can be divided into point-to-point motion control and continuous trajectory motion control according to the control principle.

Point position control is a point-to-point positioning control that does not control the motion trajectory between points, nor does it perform processing

or measurement during this process.

Continuous trajectory control is divided into linear control and contour control. Linear control refers to the linear motion of the controlled object in a certain

direction at a certain speed (single axis or multi axis linkage), during which processing or measurement is required; Contour control is the process of

controlling the instantaneous position and velocity of two or more coordinate axes to form a contour curve or surface in a plane or space through linkage.

2. Speed control and acceleration control

The motion controller speed control can be used alone or combined with position control to form a dual loop control, but the main loop is position control, and

speed control serves as feedback correction to improve the dynamic performance of the system.

3. Synchronous control

Synchronous control of motion controller refers to the synchronous motion control of speed or position of two or more axes, such as system control with electronic

gearbox and electronic cam functions. Some require not only simultaneous startup, but also position synchronization, which requires high synchronization accuracy.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 9907-005 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
9907-005 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 9907-005Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.