9905-864 WOODWARD Debugger unit
The 9905-864 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 9905-864
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.
II. Core Functions
- Speed Control:
- 9905-864 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.
-
Advantages of motion controller:
(1) The hardware composition is simple. Simply insert the motion controller into the PC bus and connect the signal lines to form the system;
(2) You can use the rich software already available on the PC for development;
(3) The code universality and portability of motion control software are good;
(4) There are many engineering personnel who can carry out development work and do not require too much training to proceed with development.
Disadvantages of motion controllers:
(1) The motion controller with a board structure adopts a gold finger connection and is fixed on one side, which is not suitable for long-term operation in most industrial sites with poor environmental conditions (severe vibration, dust, and oil pollution).
(2) Waste of PC resources. Due to the bundled sales of PCs, users actually only use a small portion of PC resources. Unused PC resources not only cause idle and waste, but also bring maintenance troubles.
(3) The overall reliability is difficult to guarantee, as the PC can be either an industrial computer or a commercial computer. After system integration, there is a significant difference in reliability that cannot be guaranteed by the motion controller.
(4) Difficult to highlight industry characteristics.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 9905-864 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 9905-864 Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 9905-864Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
9907-173 Woodward ProTech 203,
8440-2082 Woodward ProTech 203,
9907-018 Woodward speed control module,
5466-042 Woodward turbine controller,
5462-268 Woodward speed control module,
5463-397 Woodward Ship Spare Parts,
1326-183 WOODWARD Debugger unit,
5448-906 Woodward speed control module,
5462-896 Woodward turbine controller,
8440-2164 Woodward overspeed protector,
Reviews
There are no reviews yet.