8200-177 Woodward turbine controller

Price:

Product basic information
Manufacturer: Woodward
Model: 8200-177
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8200-177 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8200-177 controller debugger module Motor touch screen WOODWARD

8200-177 Woodward turbine controller

The 8200-177 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8200-177
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8200-177 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

What is a switch chip driver
Switch chip drivers typically refer to software components used in network switches or similar network devices to control and manage the operation

of switch chips. This driver is the interface between the hardware device and the operating system, which enables the operating system to recognize

and use the switching chip to perform network tasks such as packet transmission, filtering, and forwarding. The following is a detailed explanation of the switch chip driver:

Function and Function:
Hardware identification and initialization: When the switch chip is installed in the system, the driver is responsible for notifying the operating system of the

existence of new hardware and completing the hardware initialization work, including loading necessary firmware and configuring the parameters of the switch chip.

Data transmission control: The driver manages the transmission of data packets between the switch chip and the network, as well as between

different ports within the switch chip. It determines the routing of data packets based on network protocols and the destination address of the packets.

Network protocol support: The switch chip driver implements the relevant parts of the network protocol stack, supporting standard protocols such

as TCP/IP, Ethernet, etc., to ensure that data packets can be properly encapsulated and decapsulated.

Error handling and diagnosis: The driver is responsible for monitoring the status of the switch chip, detecting and handling possible errors such as

packet conflicts, link failures, etc. Meanwhile, it also provides network diagnostic tools to assist administrators in analyzing and resolving network issues.

Performance optimization: Switching chip drivers improve data transmission efficiency, reduce latency, and enhance overall network performance

by optimizing algorithms and buffer management.

User Interface: The driver provides a user interface that allows network administrators to configure switch chip settings, such as VLAN partitioning, QoS policies, port mirroring, etc.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8200-177 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8200-177 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8200-177Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.