9905-001 SPM-A WOODWARD Debugger unit
The 9905-001 SPM-A is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 9905-001 SPM-A
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions
- Speed Control:
- 9905-001 SPM-A Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.

-
of minimizing volume and cost.
What is a microcontroller? Working principle and application analysis
Structure diagram of microcontroller
Microcontrollers are usually durable, but this is not always the case.
For example, the microcontroller that controls a car engine must be able to operate at temperature limits that general computers cannot
withstand. The microcontroller of a car in Alaska, USA needs to operate in cold weather of minus 34 degrees Celsius, while the same controller in Nevada,
USA needs to operate in a hot environment of above 49 degrees Celsius. Combined with the heat generated by the engine operation, the temperature of the
engine case can reach as high as 65-80 degrees Celsius above zero.
The embedded microcontroller used inside the video recorder does not have such strict requirements.
In fact, there are various types of processors used as microcontrollers. For example, the mobile phone mentioned in the article “Working Principles
of Digital Mobile Phones” contains a Z-80 processor. The Z-80 processor is an 8-bit microprocessor that was born in the 1970s and was initially
used in home computers at that time. The Garmin global positioning system in the working principle of GPS receivers includes a low-power version
of Intel 80386 processor, which is said to be like this. The Intel 80386 processor was originally designed specifically for desktop computers.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 9905-001 SPM-A Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 9905-001 SPM-A Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 9905-001 SPM-ASuitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
8406-121 Woodward Ship Spare Parts,
1680-631 Woodward ProTech 203,
9904-261 Woodward Ship Spare Parts,
5461-292 Woodward Ship Spare Parts,
9907-806 WOODWARD Debugger unit,
5464-034 WOODWARD Debugger unit,
5462-916 Woodward speed control module,
8250-807 Woodward turbine controller,
5463-579 Woodward turbine controller,
5464-727 Woodward ProTech 203,





Reviews
There are no reviews yet.