UG-10D WOODWARD Debugger unit

Price:

Product basic information
Manufacturer: Woodward
Model: UG-10D
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
UG-10D controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator controller debugger module Motor touch screen UG-10D WOODWARD

UG-10D WOODWARD Debugger unit

The UG-10D is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward UG-10D
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- UG-10D Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

How to adjust servo controller _ Difference between servo controller and servo driver

How to adjust the servo controller

The debugging of servo controllers requires specific settings and adjustments based on specific application scenarios and controller models.

Generally speaking, the debugging of servo controllers includes the following aspects:
Electrical parameter adjustment: including motor parameter setting and calibration, driver parameter setting, power output adjustment, etc.

The settings of these parameters need to be adjusted according to the specific controller manual and application scenarios.

Control mode selection: Servo controllers usually have multiple control modes to choose from, such as position control mode, speed control mode,

torque control mode, etc., which need to be selected according to the actual application scenario.

PID parameter adjustment: Servo controllers usually use PID control algorithms, and PID parameter settings and adjustments need to be made according to

actual application scenarios to achieve better control performance.

Adjustment of motion parameters: including the setting and adjustment of motion parameters such as acceleration, deceleration, and maximum speed,

which need to be adjusted according to actual application scenarios.

Troubleshooting: During the debugging process, various faults may occur, such as electrical faults, control faults, etc., which need to be promptly resolved.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: UG-10D Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
UG-10D Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: UG-10DSuitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.