9907-173 Woodward ProTech 203

Price:

Product basic information
Manufacturer: Woodward
Model: 9907-173
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
9907-173 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 9907-173 controller debugger module Motor touch screen WOODWARD

9907-173 Woodward ProTech 203

The 9907-173 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 9907-173
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 9907-173 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

workflow
When the controller sends out a control signal, the gate driver first amplifies the signal through an amplifier and converts it into a driving signal suitable for MOSFET

or IGBT gate. Then, the driving signal is applied to the gate through the output circuit to charge and discharge the gate capacitance. When the gate voltage reaches a

certain threshold, MOSFET or IGBT begins to conduct; When the gate voltage drops to a certain level, the device shuts off. Throughout the process, the gate driver needs

to respond quickly and output stable driving signals to ensure the normal operation of the device.

Application and Development Trends of Gate Drivers
Application field
Gate drivers are widely used in power electronic systems, especially in fields such as motor control, inverters, and switching power supplies. They improve the efficiency

and stability of the entire system by optimizing the performance and reliability of MOSFETs and IGBTs. For example, in the motor control system of electric vehicles, gate drivers

are used to drive MOSFET or IGBT switching elements of inverters, achieving precise control and efficient operation of the motor.

development trend
With the continuous development of power electronics technology, gate drivers have also shown the following development trends:

High integration: In order to reduce size, lower power consumption, and improve reliability, gate drivers will tend towards higher integration. The improvement of integration can

not only simplify system design, but also enhance the overall performance of the system.
High speed drive: With the increasing demand for communication and data processing, gate drivers need to provide faster switching speeds to adapt to high-frequency operations.

The high-speed driving capability will help improve the response speed and efficiency of the system.
Low power design: Energy saving and environmental protection are important development trends for future electronic devices. The gate driver needs to adopt a low-power design

to reduce energy consumption and lower system thermal management costs.
High reliability and anti-interference ability: With the development of wireless communication and industrial automation, as well as the complexity of the working environment,

gate drivers need to have higher anti-interference ability and reliability to ensure the stable operation of the system.
New materials and technologies: With the development of new materials and technologies, such as the development of new materials and technologies, revolutionary changes

have been brought to gate drivers, promoting their further application and optimization in the field of power electronics.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 9907-173 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
9907-173 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 9907-173Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.