1886-313 Woodward ProTech 203

Price:

Product basic information
Manufacturer: Woodward
Model: 1886-313
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
1886-313 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 1886-313 controller debugger module Motor touch screen WOODWARD

1886-313 Woodward ProTech 203

The 1886-313 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 1886-313
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 1886-313 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Servo drive malfunction and maintenance

A servo driver is a controller used in conjunction with a servo motor to control the servo motor. It is a part of the servo system and plays a very important role

in the industrial field. So, customers must know some common faults and troubleshooting methods after purchasing servo drives, in order to quickly deal with

similar problems. Today, the editor of Huantong Electromechanical will share with you the maintenance methods for servo drives.

(1) After power on, the LED light of the servo drive does not light up

Fault cause: It may be due to low voltage

Solution: Increase the voltage

(2) The LED light is on, but the servo motor is not rotating

Reason for malfunction: The command signal is not connected to the driver signal ground

Solution: Connect the command signal ground to the driver signal ground

(3) The LED light stays red all the time

Reason for malfunction: There is a malfunction present

Solution: Check if the machine has any issues such as overvoltage, overheating, short circuit, etc.

(4) When the servo motor rotates, the LED light flashes continuously

Fault cause: HALL phase setting error

Solution: Check if the motor phase switch setting is correct.

Have you learned how to summarize several common servo drive faults and their solutions? We can easily handle similar problems in the future.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 1886-313 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
1886-313 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 1886-313Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.