8200-019 Woodward ProTech 203

Price:

Product basic information
Manufacturer: Woodward
Model: 8200-019
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8200-019 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8200-019 controller debugger module Motor touch screen WOODWARD

8200-019 Woodward ProTech 203

The 8200-019 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8200-019
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8200-019 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Dual mode electric vehicle controller
1. Hall adaptive with or without

Automatic switching between Hall drive and non Hall drive, with self-learning function, particularly suitable for the maintenance market.

Whether using a 120 degree motor or a 60 degree motor, and regardless of how the Hall and phase wires are connected, as long as

the functional wires are correctly connected, the controller will automatically do everything for you.

2. Anti theft function

(1) If the non external anti-theft device closes the power lock, the system will automatically enter the anti-theft state. If the controller detects

that the motor is turning forward, it will apply force backward, and vice versa.

(2) After receiving a valid anti-theft signal, the external anti-theft controller enters the anti-theft state. When the controller detects that the motor is

rotating forward, it applies force backward, and vice versa.

3. Soft undervoltage and undervoltage protection function

When the battery voltage is insufficient and has not reached the undervoltage protection level, if high current output is continuously used,

the internal resistance and line resistance of the battery will generate a significant voltage drop, causing the controller to immediately

implement undervoltage protection.

In response to this situation, our controller”s current limit value decreases as the battery voltage drops below a certain level. Therefore,

the controller can continue to operate in a low current form, effectively improving the driving range of the electric vehicle. When the battery voltage falls below the undervoltage protection point, the output is turned off to protect the battery.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8200-019 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8200-019 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8200-019Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.