8400-061 Woodward speed control module

Price:

Product basic information
Manufacturer: Woodward
Model: 8400-061
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8400-061 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8400-061 controller debugger module Motor touch screen WOODWARD

8400-061 Woodward speed control module

The 8400-061 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8400-061
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8400-061 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

In short, the debugging of servo controllers requires specific settings and adjustments based on the specific application scenario

and controller model. It is recommended to carefully read the controller manual before debugging and set and adjust according to the

requirements of the manual. At the same time, safety should be taken into account during debugging to avoid causing harm to personnel and equipment.

The difference between servo controller and servo driver

Servo controllers and servo drivers are two different devices, and their roles and functions are also different.

A servo drive is a device that controls the speed and output torque of a motor. It is mainly responsible for converting control signals from a servo

controller into motor control signals, achieving precise control of the motor. Servo drives typically use PWM modulation technology, which can convert DC

voltage into AC signals with variable frequency and amplitude, thereby achieving precise control of motor speed and torque.

A servo controller is a device that controls servo drives and motors. It is mainly responsible for monitoring and controlling parameters such as position,

speed, acceleration, torque, etc. of the motor, and achieves precise control of the motor through cooperation with the servo drive. Servo controllers typically use

PID control algorithms, which can adjust the control signal of the motor based on feedback signals, thereby achieving precise control of the motor.

Therefore, servo controllers and servo drives play different roles in the control system, and their roles and functions are to cooperate with each other to achieve precise control of the motor.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8400-061 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8400-061 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8400-061Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.