8915-526 Woodward speed control module
The 8915-526 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 8915-526
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.
II. Core Functions
- Speed Control:
- 8915-526 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.
-
A servo driver is a controller used in conjunction with a servo motor to control the servo motor. It is a part of the servo system and plays a very important role
in the industrial field. So, customers must know some common faults and troubleshooting methods after purchasing servo drives, in order to quickly deal with
similar problems. Today, the editor of Huantong Electromechanical will share with you the maintenance methods for servo drives.
(1) After power on, the LED light of the servo drive does not light up
Fault cause: It may be due to low voltage
Solution: Increase the voltage
(2) The LED light is on, but the servo motor is not rotating
Reason for malfunction: The command signal is not connected to the driver signal ground
Solution: Connect the command signal ground to the driver signal ground
(3) The LED light stays red all the time
Reason for malfunction: There is a malfunction present
Solution: Check if the machine has any issues such as overvoltage, overheating, short circuit, etc.
(4) When the servo motor rotates, the LED light flashes continuously
Fault cause: HALL phase setting error
Solution: Check if the motor phase switch setting is correct.
Have you learned how to summarize several common servo drive faults and their solutions? We can easily handle similar problems in the future.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 8915-526 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 8915-526 Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 8915-526Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
5501-471 Woodward turbine controller,
8237-2601 Woodward speed control module,
5463-127 Woodward speed control module,
5403-977 WOODWARD Debugger unit,
9907-955 Woodward speed control module,
5466-063 Woodward turbine controller,
8239-005 Woodward Ship Spare Parts,
5461-773 WOODWARD Debugger unit,
5405-818 WOODWARD Debugger unit,
5501-510 Woodward overspeed protector,
SVGASML 859-8090-005 G Cap Gauge ASP Assembly
ASML 4022.460.2111 Wafer Chuck Table
USHIO PE-250U3SV2 controller for wafer grindingcoati
ASML 4022.639.86642 IR1-NIR Solid State Laser Module ELEC-I-1739=9C
ASML PAS 2500 5000 STEPPER TESA BOX 2K0023
1PCS ASML 4022 192 91202 90days warranty via DHL or FedEx
Sankyo Robot Controller SC3150 ASML 4022.636.32221
ASML 4022.631.1584 Optical Gas Analyzer
ASML 4022.455.9427 Control Module With Phase Modulator for ASML Green Laser
ASML 5DA800.DUVL.50
ASML SHUTTER ENCODER DRIVE PCB FOR PAS 25005000 4022.430.06721
ASML 4022.472.42583 Class 3B ( AIGaInP ) 635nm 20mW Solid state Laser RED-635
SVG ASML 121-142F 99-45959 Controller Low-Spin Motor Developer
1PCS ASML 4022.437.1822 CPU TC3X DSPGP1 V2.0 90days warranty via DHL or FedEx
Sankyo Robot Controller SC3150 ASML 4022.636.32221 SEM-I-536=9B47
879-8073-002A Board, Cap Gauge ASP Assy Circuit
20.3cm Scheibe Chuck Asml Svg Silikon Valley Gruppe Scheibe SchleifenÜber
ASML 2501244-01 RING, SUSPENSION LINER LPC
SVG 99-46450-01 9200SE SVG ASML 90 track Z-robot, 23074-01-D, 110467
ASML 4022.639.86644 IR1-NIR ELEC-I-1001=8F
ASML STEPPER PAS2500 FESTO PNEUMATIC BOX III 4022.428.24302 KAY VALVE
Reviews
There are no reviews yet.