5501-376 Woodward ProTech 203

Price:

Product basic information
Manufacturer: Woodward
Model: 5501-376
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5501-376 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5501-376 controller debugger module Motor touch screen WOODWARD

5501-376 Woodward ProTech 203

The 5501-376 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5501-376
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5501-376 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

control performance

Vector controllers have good control performance in motor starting, stopping, acceleration and deceleration. Due to its ability to control motor torque and

speed with high precision, it has higher control accuracy and is suitable for high-precision control fields. In addition, vector control can achieve smooth and

precise operation control, improving the efficiency of motor operation.

Application scenarios

Vector controllers are widely used in high-performance motor applications, such as industrial automation, precision machinery, aerospace, and other fields.

In these fields, the control accuracy and performance requirements for motors are high, and vector controllers can meet these needs.

3、 Overview of Sine Wave Controller

working principle

The sine wave controller controls the motor by directly controlling the three-phase sine wave signal. Its working principle is based on the sine function in mathematics,

which controls the generated sine wave signal by adjusting amplitude, frequency, and phase parameters. The sine wave controller represents the three-phase output current

and voltage as vectors during the control process, thereby achieving control of the motor.

control performance

Compared to vector controllers, sine wave controllers have relatively lower control performance. Due to the limitations of the control algorithm, it cannot achieve the control

accuracy of a vector controller. Especially in complex operating conditions, the performance of sine wave controllers is relatively limited. However, sine wave controllers

have the advantages of simple structure and low cost, making them suitable for situations where control accuracy is not required.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5501-376 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5501-376 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5501-376Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.