5464-661 Woodward Ship Spare Parts

Price:

Product basic information
Manufacturer: Woodward
Model: 5464-661
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5464-661 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5464-661 controller debugger module Motor touch screen WOODWARD

5464-661 Woodward Ship Spare Parts

The 5464-661 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5464-661
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5464-661 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Design of Driver Testing System

1. Introduction
The AC speed control system usually uses IGBT pulse width modulation drivers to control the execution motor to operate in four quadrants, thereby meeting the

high-precision and high real-time requirements of the control system. The driver is the core part of the AC speed regulation unit in the control system, and its quality and performance

directly affect the accuracy and performance of the entire control system. However, once the driver malfunctions during use, it will affect the normal operation of the

entire control system. Therefore, it is necessary to design and develop a comprehensive performance testing system for the driver to quickly troubleshoot and ensure the performance quality of the control system.

2. Working principle of the driver and technical characteristics of the testing system

Figure 1: Schematic diagram of the drive speed regulation system

Drive speed regulation can generally be divided into four parts: rectification, DC holding, inversion, and control. The current regulator compares and adjusts the actual current

value with the given value, while the speed regulator obtains the actual speed value through the speed measurement motor and rotor position detection, and adjusts the speed value.

Drivers belong to high-power precision devices, which may cause mutual interference with the outside world, affecting normal operation. The noise signals generated by other

devices on the same power supply may also enter the driver through radiation and power conduction, and the high-order harmonics and radio wave noise generated by the driver

can easily affect the power grid and surrounding equipment. Eliminating interference and ensuring the normal

operation of the equipment is a major feature and challenge of this system. The standard grounding method is adopted in the design, and filtering devices are connected at the

front and rear ends of the driver. Surge current limiting circuits are connected in series in the circuit to effectively avoid mutual interference and ensure accurate and reliable testing signals.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5464-661 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5464-661 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5464-661Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.