5463-729 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 5463-729
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5463-729 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5463-729 controller debugger module Motor touch screen WOODWARD

5463-729 Woodward overspeed protector

The 5463-729 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5463-729
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5463-729 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

In addition, computers also have some input and output devices so that they can exchange information with users.

On your desktop computer, the keyboard and mouse are input devices, while the monitor and printer are output devices.

A hard drive is an input/output device – it can both input and output.

The desktop computer you are using is a “general-purpose computer” that can run thousands of various programs.

Microcontrollers are specialized computers used for special purposes. It focuses on doing one thing. Microcontrollers

share many common characteristics. If a computer has most of the following characteristics, then you can call it a “microcontroller”:

Microcontrollers are embedded within other devices (usually consumer products) to control the functionality and operation

of the product. Therefore, microcontrollers are also known as “embedded controllers”.

A microcontroller runs a specific program to accomplish a specialized task. This program is stored in ROM (Read Only Memory) and is generally not modified.

Microcontrollers are typically low-energy devices. The power plug of a desktop computer is almost always plugged into a wall socket, with a

power output of approximately 50 watts. The power of a battery powered microcontroller is approximately 0.05 watts.

Microcontrollers have a dedicated input device and typically (but not always) a light-emitting diode or liquid crystal display screen used as an

output. The microcontroller also obtains input signals from the devices it controls and controls the device by sending signals to different parts of the device.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5463-729 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5463-729 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5463-729Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.