SMM40 Woodward turbine controller

Price:

Product basic information
Manufacturer: Woodward
Model: SMM40
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
SMM40 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator controller debugger module Motor SMM40 touch screen WOODWARD

SMM40 Woodward turbine controller

The SMM40 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward SMM40
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- SMM40 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Application of New Technologies in Gate Drivers
1. Intelligent gate drive technology
Intelligent gate drive technology achieves intelligent management of gate drivers by integrating intelligent control algorithms and fault diagnosis functions.

This technology can monitor the working status of the gate driver in real time, including parameters such as voltage, current, temperature, etc., and automatically

adjust the driving parameters based on the monitoring results to optimize performance. At the same time, intelligent gate drive technology also has fault diagnosis and warning

functions, which can issue warnings in advance and take corresponding protective measures before faults occur, avoiding equipment damage and safety accidents.

2. Digital gate drive technology
Digital gate driver technology uses digital signal processing technology to control and optimize the performance of gate drivers. Compared with traditional analog gate drive technology,

digital gate drive technology has higher accuracy, stronger anti-interference ability, and more flexible control strategies. Through digital control chips such as digital signal processors (DSPs) or microcontrollers (MCUs), digital gate drive technology

can achieve precise control of gate voltage and current, and adjust control parameters in real time according to system requirements to optimize system performance.

3. Isolation technology
In power electronic systems, electrical isolation is required between the gate driver and the main controller to prevent high voltage crosstalk and signal interference. Traditional isolation

techniques mainly include optocoupler isolation and transformer isolation. However, these traditional isolation technologies have disadvantages such as large size, high cost, and

slow transmission speed. In order to overcome these drawbacks, new isolation technologies such as capacitive coupling isolation and magnetic coupling isolation have emerged.

These new technologies have the advantages of small size, low cost, and fast transmission speed, and have gradually become the mainstream development direction of gate driver isolation technology.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: SMM40 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
SMM40 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: SMM40Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.