8200-1204 Woodward Ship Spare Parts

Price:

Product basic information
Manufacturer: Woodward
Model: 8200-1204
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8200-1204 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8200-1204 controller debugger module Motor touch screen WOODWARD

8200-1204 Woodward Ship Spare Parts

The 8200-1204 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8200-1204
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8200-1204 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

3. Data exchange

This refers to the implementation of data exchange between CPUs and controllers, as well as between controllers and devices.

For the former, data is written to the controller in parallel by the CPU through the data bus, or read from the controller in parallel; For the

latter, the device inputs data into the controller or transmits data from the controller to the device. For this purpose, data registers must be set up in the controller.

4. Status description

The status controller for identifying and reporting equipment should record the status of the equipment for the CPU to understand. For example

, the CPU can only start the controller to read data from the device when it is in the ready to send state. For this purpose, a status register should

be set up in the controller, where each bit reflects a certain state of the device. After the CPU reads the contents of the register, it can understand the status of the device.

5. Receive and identify commands

The CPU can send various commands to the controller, and the device controller should be able to receive and recognize these commands.

For this purpose, the controller should have corresponding control registers to store received commands and parameters, and decode the received

commands. For example, a disk controller can receive 15 different commands such as Read, Write, Format, etc. sent by the CPU, and some commands

also have parameters; Correspondingly, there are multiple registers and command decoders in the disk controller.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8200-1204 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8200-1204 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8200-1204Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.