EASYGEN-3500-5 Woodward turbine controller

Price:

Product basic information
Manufacturer: Woodward
Model: EASYGEN-3500-5
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
EASYGEN-3500-5 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator controller debugger EASYGEN-3500-5 module Motor touch screen WOODWARD

EASYGEN-3500-5 Woodward turbine controller

The EASYGEN-3500-5 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward EASYGEN-3500-5
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- EASYGEN-3500-5 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

3/4. Input and output ports

The third and fourth of the five elements are input and output (I/O), respectively. I/O is a channel for exchanging data and signals

between external devices and microcontrollers. In microcontroller design, dedicated peripheral circuits for external devices are

required to perform data input, output, and communication. The basic operations corresponding to input and output include CPU read and write.

Input/output is called a port, and its address is called a port address. According to the different data and signal exchange functions with external devices, it needs to be divided into input ports and output ports.
5. Bus

CPU、 The memory and I/O functions constitute the basic internal functional units of a microcontroller, but only by connecting the CPU, memory,

and I/O through wiring so that signals can flow through each unit, can the control of the microcontroller be achieved. Therefore, the fifth element of the microcontroller is the bus. The following figure is an example of a microcontroller signal flow. The various functions of the microcontroller are connected by multiple signal lines, which are called buses.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: EASYGEN-3500-5 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
EASYGEN-3500-5 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: EASYGEN-3500-5Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.