8440-1706 Woodward speed control module
The 8440-1706 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 8440-1706
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions
- Speed Control:
- 8440-1706 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.

-
4. Characteristics of testing system software
The testing system software is developed according to software engineering requirements, striving to achieve powerful functionality, stability, and reliability.
At the same time, the software is expanded to have expert system functionality.
4.1 Human Computer Interaction Interface
The interface is the manifestation of the testing system and the window for users to analyze and judge. Users can set self check and test items, as well as
perform printing and fault diagnosis. Set the project to be tested in the human-computer interaction interface, and the computer sends speed commands to the tested driver.
The data obtained through a dedicated interface and other
testing equipment is analyzed and compared online by the testing software to provide a conclusion on whether it is qualified or not. At the same time, the expert diagnostic
knowledge base is called to diagnose the fault and provide a solution to the fault. The composition of the human-computer interaction interface module is shown in Figure 5.
Figure 5: Module diagram of human-computer interaction interface
4.2 Testing System Dynamic Link Library
The dynamic link library of the testing system adopts the standard access method ODBC (Open Database Connectivity), and establishes a set of dynamic link library DLLs,
namely the driver basic information database and the specialized machine diagnostic knowledge database. The main content of the basic information database of the drive is
the technical parameters of the drive, and the expert diagnostic knowledge database mainly analyzes typical faults of the drive. If users need to expand the content of the expert
diagnostic knowledge database, they can add it through the human-machine interface.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 8440-1706 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 8440-1706 Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 8440-1706Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
9905-918 WOODWARD Debugger unit,
5415-737 WOODWARD Debugger unit,
5437-078 Woodward ProTech 203,
5461-088 Woodward ProTech 203,
8924-574 Woodward Ship Spare Parts,
8440-1947 Woodward speed control module,
5464-330 WOODWARD Debugger unit,
8404-5004 Woodward Ship Spare Parts,
5437-092 WOODWARD Debugger unit,
5463-375 Woodward overspeed protector,





Reviews
There are no reviews yet.