Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/0/00/0/00/11/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH070/60017/0/0/00/0/00/11/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
Different motor control methods for open-loop and closed-loop motorsOpen loop motor is a type of motor without feedback control, also known as non closed loop motor. Its output speed and position are determined by the input control signal, and there is no position or speed feedback loop to control the output. Its characteristics are low cost, simple structure, large speed fluctuations and large errors, suitable for some application scenarios that do not require accuracy and small load changes.The structure of an open-loop motor includes a power supply, a controller, and a driver. The controller receives input signals and converts them into signals that the motor can understand, while the driver converts electrical energy into mechanical energy, causing the motor to rotate.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH070/60017/0/0/00/0/00/11/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH070/60017/0/0/00/0/00/11/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH070/60017/0/0/00/0/00/11/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM100/40/080/P1/45/M1/B0 Schneider Electric | Quick Delivery,
SH070/60030/0/1/00/00/00/01/00 | Schneider | EALU motor,
SR058/60/005/P0/21/S1/B1/T | Schneider | EALU motor,
SH140/30270/0/0/00/00/10/01/00 | Schneider | EALU motor,
ISH100/30025/0/3/00/0/10/01/00 Brand new original | In stock supply,
ISH070/60022/0/1/00/0/10/01/00 Schneider Electric | Quick Delivery,
ISH140/15085/0/1/00/0/00/01/00 Schneider Electric | Quick Delivery,
SM100-30-080-PO-44-S1-B1 Schneider Electric | Quick Delivery,
ISH140/20125/0/0/00/0/00/00/00 Brand new original | In stock supply,
SH070/60020/0/1/00/00/10/01/00 Advanced motor control technology,
Reviews
There are no reviews yet.