ISH070/60017/0/0/00/0/10/00/00 Brand new original

ISH070/60017/0/0/00/0/10/00/00 Brand new original | In stock supply

Price:

Brand: Schneider/ELAU
Model: ISH070/60017/0/0/00/0/10/00/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60017/0/0/00/0/10/00/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/0/00/0/10/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60017/0/0/00/0/10/00/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Stepper motor Brushed motor Brushless motorRotating method Throughdriving circuitthe armature winding phases (two-phase, three-phase, five-phase) are excited in the order decided. By the sliding contact type of rectifying mechanism through the brush and commutator, switch the armaturecurrent. by using magnetic pole positionsensorsandsemiconductorswitches instead of brushes and commutators to achieve brushless.Driving circuit Need Not needed NeedTorque The torque is relatively large. (Especially the torque at low speeds) Large starting torque, torque is proportional to armature current. (The torque is relatively large at medium to high speeds)Rotating speed Proportional to the frequency of the input pulse. There are slip zones in the low-speed range. Proportional to the voltage applied to the armature. The speed decreases as the load torque increases.High-speed rotation High-speed rotation is difficult (need to slow down). limited by the commutator and brush rectifying mechanism, it can reach several thousand rpm High speeds of thousands to tens of thousands of rpm possibleRotating life Determined by bearing life. Thousands of hours Limited by the wear of the commutator and brushes. Hundreds to thousands of hours. Determined by bearing life. Thousands to hundreds of thousands of hours.Forward and reverse method The order of the excitation phase of the drive circuit needs to be changed Reversing the polarity of the input voltage to the pin The order of the excitation phase of the drive circuit needs to be changedControl; The rotation speed and position (rotation amount) can be controlled by command pulses in open loop (but there is a problem of loss of steps). Constant-speed rotation requires speed control (feedback control using a speed sensor). Since torque is proportional to current, torque control is straightforward.Difficulty of obtaining Easy: There are many varieties. Easy: Many manufacturers and varieties, many options. Difficulties: mainly dedicated motors for specific applicationsPrice The price is more expensive if the drive circuit is included. Cheaper than brushless motors. Relatively cheap, brushless motors are a bit more expensive because of the upgrade of the magnets. If the drive circuit is included, the price is more expensive

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60017/0/0/00/0/10/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60017/0/0/00/0/10/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60017/0/0/00/0/10/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.