ISH070/60017/0/1/00/0/00/01/00 | Schneider

ISH070/60017/0/1/00/0/00/01/00 | Schneider | EALU motor

Price:

Brand: Schneider/ELAU
Model: ISH070/60017/0/1/00/0/00/01/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60017/0/1/00/0/00/01/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/1/00/0/00/01/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60017/0/1/00/0/00/01/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Increase the motor scaleHowever, when we are unable to increase the slot filling ratio by means of production technology, we may choose to scale up the size of the motor as a strategy. This not only provides a larger slot space to accommodate the enamel coil, but we also know from the torque formula of the motor that there is a square relationship between the rotor diameter and the torque. For example, if the rotor diameter is increased from 50 to 60, although the diameter only increases by 1.2 times, the torque will increase by 1.44 times. If we maintain the same torque, this means that we can reduce the current by 1.44 times, thereby reducing the copper loss. Therefore, scaling up the motor size can significantly contribute to efficiency improvement. However, this also means that it will increase the material cost and storage and transportation cost, which may not be the best choice in thecommodification process.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60017/0/1/00/0/00/01/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60017/0/1/00/0/00/01/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60017/0/1/00/0/00/01/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.