Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60017/0/1/00/0/10/10/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH070/60017/0/1/00/0/10/10/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
3、Application scenarios:Servomotorare widely used in applications that require high-performance control, such asCNCMachine tools, Roboticsand more.Stepper motorCommon in devices such as printers, scanners, etc. that do not require a feedback system.Motor cost1、Servo motorMore expensive but with superior performance, suitable for high-end applications. Servo motors are more energy-efficient, which can save energy in the long run, but theirmaintenanceand replacement parts costs are often higher than those of stepper motors.2、Stepper motorSimple structure, low cost, suitable for applications with limited budgets. Due to its high pole number and the ability to produce holding torque at zero speed, the stepper motor consumes less electrical energy in static.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH070/60017/0/1/00/0/10/10/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH070/60017/0/1/00/0/10/10/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH070/60017/0/1/00/0/10/10/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM140/30/290/P1/45/S1/B0 Advanced motor control technology,
ISH070/60022/0/0/00/0/00/10/00 Advanced motor control technology,
SM100-50-030-P1-45-S1-B0 Advanced motor control technology,
SH31001P01A2020 Advanced motor control technology,
SB105/40/02/05/19/S/R1/64/EOKN | Schneider | EALU motor,
SB145/30/08/05/24/S/3B/64/EAKN | Schneider | EALU motor,
SH055/80013/0/0/00/00/00/00/00 Advanced motor control technology,
ISH070/60011/0/0/00/0/00/00/00 High precision, high dynamic response,
SM100-30-080-PO-44-S1-BO High precision, high dynamic response,
SM070-60-020-P0-45-S1-B1 Advanced motor control technology,
Reviews
There are no reviews yet.