ISH070/60022/0/1/00/0/10/11/00 Advanced motor control technology

Price:

Brand: Schneider/ELAU
Model: ISH070/60022/0/1/00/0/10/11/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH070/60022/0/1/00/0/10/11/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH070/60022/0/1/00/0/10/11/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH070/60022/0/1/00/0/10/11/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

Increase the voltageIn the form of energy conversion in the motor, the loss of electrical energy is manifested as copper loss, and its influencing factors includecurrentandresistance. If the designer finds that the copper loss is too large, the simplest solution is to increase the working voltage. For example, for a motor with an input power of 500W, if its working voltage is 10V, it means that the current must be 50A, because the input power is the product of voltage and current. However, if we increase the voltage to 100V, the current only needs to be 5A. Since the relationship between copper loss and current is quadratic, the copper loss will be reduced by 100 times after the voltage is increased. This also explains why the working voltage of recent electric vehicles tends to develop to 800V.Improve the slot utilization rate of ****When it is not possible to increase the voltage, we often need to find ways to reduce the resistance. The most straightforward strategy is to increase the cross-sectional area of the conductor. In the field of motors, this has led to discussions on how to improve slot fill factors, and has resulted in new technologies such as flat angle winding wires, which are varnished wires designed to achieve the goal of improving motor efficiency.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH070/60022/0/1/00/0/10/11/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH070/60022/0/1/00/0/10/11/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH070/60022/0/1/00/0/10/11/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.