ISH100/30025/0/0/00/0/10/11/00 Schneider Electric

ISH100/30025/0/0/00/0/10/11/00 Schneider Electric | Quick Delivery

Price:

Brand: Schneider/ELAU
Model: ISH100/30025/0/0/00/0/10/11/00
Rated Voltage: 480 Vrms
Max. Current: 61 Arms
Stall Current: 17.6 Arms
Rated Speed: 3000 Revolution Per Minute (rpm)
Max. Speed: 4000 Revolution Per Minute (rpm)
Stall Torque: 27.8 Nm
Rated Power: 4.05 kW

Categories: ELAU
Tags: DC motor ELAU ISH100/30025/0/0/00/0/10/11/00 Motor SCHNEIDER servo motor

Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor

Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH100/30025/0/0/00/0/10/11/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.

Model Analysis | Decoding the SH140/30270 Configuration

1. ISH100/30025/0/0/00/0/10/11/00 Series Designation: SH140

Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.

2. Core Parameter Code: 30270

This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:

Rated speed: 3000 rpm
Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)

3. Configuration Fields: 0/1/00/00/00/00/00

These digits define additional options, including but not limited to:

Voltage level
Protection rating (e.g., IP65)
Communication protocol (e.g., EtherCAT, CANopen)
Functional add-ons (e.g., brakes, oil seals).

What is an optical shaft motor? How does an optical shaft motor output?Light-axis motor what is it? How does a light-axis motor outputA light-axis motor is an electric drive device based on the light-axis principle. It uses the photovoltaic effect and the light-axis transmission mechanism to convert light energy intomechanical energy to achieve driving functions.Theworking principle of the light-axis motor is based on the photovoltaic effect. The photovoltaic effect refers to the generation of electron-hole pairs when photons are incident onsemiconductor materials, thus formingcurrent. The light-axis motor converts the input light energy into electrical energy and then into mechanical energy by using semiconductor materials as part of thesensor orcontroller, to achieve driving functions. Therefore, the light-axis motor can not only achieve the direct conversion and utilization of light energy but also efficiently convert electrical and mechanical energy.The output mode of the light-axis motor is realized through the light-axis transmission mechanism. The light-axis transmission mechanism refers to the mechanism that uses light energy for transmission and plays a key role in the light-axis motor. The light-axis transmission mechanism mainly consists of a light-axis, a light-axisdriver, and a load.

Technical Features | Precision Control Meets High Efficiency

1. Core Performance Parameters

Power & Torque:

ISH100/30025/0/0/00/0/10/11/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
Rated torque: 2.7 Nm (example; actual value based on code “270”).
Peak torque: Exceeds 3× rated torque for short-term overload demands.

Speed Range:

Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
Speed ratio: 1:5000 (stepless regulation for multi-condition switching).

Application Scenarios | Powering Industry 4.0

1. CNC Machining & Precision Tools

Typical Uses:

Spindle drives
Feed axis control
Five-axis machining centers

Advantages:

ISH100/30025/0/0/00/0/10/11/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
Full closed-loop control eliminates mechanical errors (e.g., screw backlash).

2.. New Energy & Environmental Equipment

Typical Uses:

Wind turbine pitch systems
Sewage treatment agitators
Solar tracking brackets

Advantages:

ISH100/30025/0/0/00/0/10/11/00 Wide temperature range (-20°C to +60°C) for extreme environments.
Corrosion-resistant coating extends outdoor lifespan.