Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH100/30044/0/3/00/0/10/01/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH100/30044/0/3/00/0/10/01/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
What is the difference between a stepper motor, brushed motor and brushless motor?When designing equipmentusingmotors, of course, it is necessary to choose the motor that is most suitable for the required work.This paper will compare the characteristics, performance and features of brushed motors,stepper motorsandbrushless motors, hoping to become a reference for everyone when choosing a motor.However, since there are various specifications included in the same category of motors, please use it only as a reference. It is still necessary to confirm the details through the technical specifications of each motor.Features of small motorsThe following table summarizes the characteristics of the stepper motor, brushed motor, and brushless motor.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH100/30044/0/3/00/0/10/01/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH100/30044/0/3/00/0/10/01/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH100/30044/0/3/00/0/10/01/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH140/30330/0/0/00/00/12/11/00 High precision, high dynamic response,
ISH070/60017/0/0/00/0/10/01/00 Brand new original | In stock supply,
SH140/30120/0/1/00/00/10/00/00 | Schneider | EALU motor,
SM100-50-030-P0-44-S1-B0 Brand new original | In stock supply,
SH055/80005/0/0/00/00/10/01/00 Advanced motor control technology,
ISH100/30025/0/1/00/0/00/01/00 Schneider Electric | Quick Delivery,
SH070/60030/0/0/00/00/00/01/00 High precision, high dynamic response,
SH055/80009/0/1/00/11/00/00/00 Brand new original | In stock supply,
SM140/30/290/P0/45/M1/B1 Schneider Electric | Quick Delivery,
SM070-60-020-P0-44-M1-B1 Schneider Electric | Quick Delivery,
Reviews
There are no reviews yet.