Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH140/15085/0/0/00/0/00/00/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH140/15085/0/0/00/0/00/00/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
The difference between BLDC motor and DD motorIn the field of motor technology, BLDC motor (brushless DC motor) and DD motor (direct drive motor) are two types of driving devices with their own characteristics. They have significant differences in design, working principles, performance, and application areas. Below, we will conduct a detailed comparative analysis of these two types of motors.1、 Overview of BLDC MotorBLDC motor, also known as brushless direct current motor, also known as electronic commutation motor (ECM or EC motor) or synchronous DC motor. It is essentially a permanent magnet synchronous motor that uses a DC power input and converts it into a three-phase AC power supply through an inverter. The BLDC motor controls the magnetic field of the motor through an electronic controller to achieve contactless commutation, and has the characteristics of high efficiency, high reliability, low noise, and good control performance.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH140/15085/0/0/00/0/00/00/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH140/15085/0/0/00/0/00/00/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH140/15085/0/0/00/0/00/00/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH205/30360/0/0/02/00/00/11/00 | Schneider | EALU motor,
SH070/60010/0/1/00/00/00/00/00 High precision, high dynamic response,
SM/100/40/080/P1/45/S1/BO Advanced motor control technology,
ISH140/30075/0/1/00/0/00/00/00 | Schneider | EALU motor,
SH055/80013/0/1/00/00/00/01/00 Schneider Electric | Quick Delivery,
SH140/30200/0/1/00/00/00/11/00 Advanced motor control technology,
SM140/30/120/P1/44/R1/B1 Schneider Electric | Quick Delivery,
SH070/60010/0/1/00/00/10/11/00 High precision, high dynamic response,
SB105/30/04/05/19/S/R1/64/EAKN Brand new original | In stock supply,
SB105/30/02/05/19/S/01/64/EOKN | Schneider | EALU motor,
Reviews
There are no reviews yet.