Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH140/15085/0/1/00/0/00/11/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH140/15085/0/1/00/0/00/11/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
3. Application scope:Because the control method of frequency conversion motors is relatively simple, it is usually suitable for some applications with low speed requirements, such as ventilation equipment, pumps, compressors, etc. However, servo motors, due to their higher control precision and response speed, are suitable for some applications with high position and speed requirements, such as CNC machine tools, robots , automated production lines, etc.4. Response speed:Because the servo motor is equipped with a servo system, it can sense the position and speed of the motor in real time and automatically adjust according to the feedback information, so its response speed is faster. The frequency conversion motor can only adjust the frequency and voltage of the power supply to control the speed of the motor, and cannot sense the speed of the motor in real time, so the response speed is relatively slow.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH140/15085/0/1/00/0/00/11/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH140/15085/0/1/00/0/00/11/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH140/15085/0/1/00/0/00/11/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SM140-30-210-P0-45-S1-B1 Brand new original | In stock supply,
SM100/50/030/P1/44/R1/B1 High precision, high dynamic response,
SB070/40/10/05/11/S/01/64/EOKN High precision, high dynamic response,
SH140/30200/0/1/02/00/00/11/00 High precision, high dynamic response,
SH100/40060/0/0/00/00/10/01/00 High precision, high dynamic response,
SLC955/30010/A/30/AA/BB/01/002 Advanced motor control technology,
SH070/60030/0/1/00/00/00/01/00 Advanced motor control technology,
SM140/30/120/P0/45/M1/B0 Advanced motor control technology,
SM-100/50/030/P3/5A/M1/B1 High precision, high dynamic response,
ISH070/60022/0/0/00/0/10/00/00 High precision, high dynamic response,
Reviews
There are no reviews yet.