Product Overview | Schneider EALU Series SH140/30270 High Performance Servo Motor
Core Positioning:
Schneider Electric”s EALU series servo motor, model ISH140/20125/0/0/00/0/10/01/00, is a high-precision, high-reliability drive solution tailored for industrial automation. By integrating Schneider”s advanced motor control technology with the modular EALU design,
this motor excels in scenarios demanding dynamic response, precise positioning, and long-term stability.
Model Analysis | Decoding the SH140/30270 Configuration
1. ISH140/20125/0/0/00/0/10/01/00 Series Designation: SH140
- Represents the medium-to-large power range, with an estimated power output of 0.75kW–3kW.
2. Core Parameter Code: 30270
This code encompasses critical specifications such as speed, torque, and encoder resolution.
For example, it may indicate:
- Rated speed: 3000 rpm
- Rated torque: 2.7 Nm
(Actual values depend on the full parameter set.)
3. Configuration Fields: 0/1/00/00/00/00/00
These digits define additional options, including but not limited to:
- Voltage level
- Protection rating (e.g., IP65)
- Communication protocol (e.g., EtherCAT, CANopen)
- Functional add-ons (e.g., brakes, oil seals).
Factory machinesKey differences in motors1. Precision:Servo motor can provide more precise position, speed, and acceleration control. Because of the feedback adjustment, very high position accuracy can be achieved, often in the range of a few microns.Stepper motorThe output characteristics are relatively simple, usually rotating with a fixed step size. It has high precision in no-load or light-load conditions, but step loss may occur under heavy load or speed changes, resulting in reduced precision.2、Power:Servomotormaintain a stable torque over a wide range of speeds. They can operate at high speeds and are more versatile. Servomotors typically provide more power in a smaller package.Stepper motorIt has strong torque at low speeds, but torque drops as speed increases. It usually works in the low-speed range. The power density of a stepper motor is low.
Technical Features | Precision Control Meets High Efficiency
1. Core Performance Parameters
Power & Torque:
- ISH140/20125/0/0/00/0/10/01/00 Rated power: Estimated 1.5kW–2.2kW (refer to selection manual).
- Rated torque: 2.7 Nm (example; actual value based on code “270”).
- Peak torque: Exceeds 3× rated torque for short-term overload demands.
Speed Range:
- Rated speed: 3000 rpm (supports high-speed light-load or low-speed heavy-load modes).
- Speed ratio: 1:5000 (stepless regulation for multi-condition switching).
Application Scenarios | Powering Industry 4.0
1. CNC Machining & Precision Tools
Typical Uses:
- Spindle drives
- Feed axis control
- Five-axis machining centers
Advantages:
- ISH140/20125/0/0/00/0/10/01/00 High rigidity and low vibration ensure surface finish quality (Ra ≤ 0.8 μm).
- Full closed-loop control eliminates mechanical errors (e.g., screw backlash).
2.. New Energy & Environmental Equipment
Typical Uses:
- Wind turbine pitch systems
- Sewage treatment agitators
- Solar tracking brackets
Advantages:
- ISH140/20125/0/0/00/0/10/01/00 Wide temperature range (-20°C to +60°C) for extreme environments.
- Corrosion-resistant coating extends outdoor lifespan.
Learn More: Click here for Schneider ELAU motor details.
SH140/30270/0/0/02/00/00/00/00 High precision, high dynamic response,
SH070/60010/0/0/00/00/00/01/00 Brand new original | In stock supply,
ISH140/30075/0/0/00/0/00/01/00 | Schneider | EALU motor,
SH070/60020/0/0/00/00/10/00/00 Brand new original | In stock supply,
SH070/60020/0/1/00/00/10/00/00 | Schneider | EALU motor,
SH32052S0001434 Schneider Electric | Quick Delivery,
SB145-30-08-05-24-S-01-64-EOKN Advanced motor control technology,
SH070/60030/0/1/00/00/00/00/00 Brand new original | In stock supply,
SM100-30-080-PO-44-S1-BO Brand new original | In stock supply,
SH30701S0001065 Advanced motor control technology,
Reviews
There are no reviews yet.