1790-791 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 1790-791
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
1790-791 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 1790-791 controller debugger module Motor touch screen WOODWARD

1790-791 Woodward overspeed protector

The 1790-791 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 1790-791
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 1790-791 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

The role of line drivers _ Application background of line drivers

The role of line drivers

A line driver is an electronic device that plays a crucial role in circuits, primarily used to enhance signal transmission and driving capabilities.

Specifically, the role of line drivers can be summarized into the following aspects:
1、 Signal amplification

Line drivers can amplify the amplitude of input signals to compensate for signal losses in transmission lines. By increasing parameters such as voltage,

current, or power of the signal, it can ensure the stability of signal transmission over long distances or in complex environments. This amplification function

enables signals to span longer distances while maintaining sufficient strength and clarity.

2、 Adaptation and Conversion

Line drivers can adapt to different signal levels, impedance matching, and signal type conversion. It can adjust the input signal to suit the working conditions

of the target device or system, providing optimal signal compatibility and matching. This helps to reduce reflection, attenuation, and distortion during signal transmission,

ensuring that the signal can be accurately and completely transmitted to the receiving end.

3、 Noise and distortion compensation

During signal transmission, noise and distortion are unavoidable issues. Line drivers use various technologies and algorithms, such as filtering, equalization, and correction,
to compensate for noise and distortion in the input signal. This helps improve signal quality, reduce the impact of noise and distortion on signal transmission, and ensure signal clarity and accuracy.

4、 Driving ability

Line drivers have high output power and driving capability, which can drive longer transmission lines and multiple target devices. It can provide sufficient current and energy to

ensure stable transmission and driving of signals in complex environments. This powerful driving capability makes line drivers widely applicable in situations where large loads or long-distance signal transmission are required.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 1790-791 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
1790-791 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 1790-791Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.