3313-055 Woodward speed control module

Price:

Product basic information
Manufacturer: Woodward
Model: 3313-055
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
3313-055 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 3313-055 controller debugger module Motor touch screen WOODWARD

3313-055 Woodward speed control module

The 3313-055 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 3313-055
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 3313-055 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Analysis of the working principle of servo drives and considerations for selecting servo drives

Servo drive is an indispensable component in modern industrial automation, mainly used to control the operation of servo motors

. Its core function is to convert input control signals (such as voltage and current signals) into mechanical motion of the motor.

The following is an introduction to the basic working principle of servo drives:

Input signal processing: The servo drive receives command signals from the control system, which may be analog signals (such as

voltage or current) or digital signals (such as pulse sequences).
Signal conversion: The control circuit inside the driver converts these signals into control signals that the motor can understand, such

as PWM (Pulse Width Modulation) signals.
Current control: The servo driver controls the speed and torque of the motor by adjusting the current output to the motor. This is usually achieved through internal power transistors.
Speed and position feedback: Servo motors are usually equipped with encoders to provide actual speed and position feedback of the motor.

These feedback signals are sent back to the driver for comparison with the expected position or velocity.
Closed loop control: Based on feedback signals, the internal control algorithm of the driver (such as PID controller) will adjust the output signal to

reduce the deviation between actual and expected, achieving precise control.
Protection function: The servo drive also has overload, overheating, overvoltage and other protection functions to ensure the safe operation of the motor and drive.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 3313-055 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
3313-055 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 3313-055Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.