4-314871-1 Woodward ProTech 203

Price:

Product basic information
Manufacturer: Woodward
Model: 4-314871-1
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
4-314871-1 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 4-314871-1 controller debugger module Motor touch screen WOODWARD

4-314871-1 Woodward ProTech 203

The 4-314871-1 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 4-314871-1
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 4-314871-1 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Advantages and disadvantages of motion controllers
Advantages of motion controller:

(1) The hardware composition is simple. Simply insert the motion controller into the PC bus and connect the signal lines to form the system;

(2) You can use the rich software already available on the PC for development;

(3) The code universality and portability of motion control software are good;

(4) There are many engineering personnel who can carry out development work and do not require too much training to proceed with development.

Disadvantages of motion controllers:

(1) The motion controller with a board structure adopts a gold finger connection and is fixed on one side, which is not suitable for long-term operation in most industrial sites with poor environmental conditions (severe vibration, dust, and oil pollution).

(2) Waste of PC resources. Due to the bundled sales of PCs, users actually only use a small portion of PC resources. Unused PC resources not only cause idle and waste, but also bring maintenance troubles.

(3) The overall reliability is difficult to guarantee, as the PC can be either an industrial computer or a commercial computer. After system integration, there is a significant difference in reliability that cannot be guaranteed by the motion controller.

(4) Difficult to highlight industry characteristics.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 4-314871-1 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
4-314871-1 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 4-314871-1Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.