5439-751 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 5439-751
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5439-751 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5439-751 controller debugger module Motor touch screen WOODWARD

5439-751 Woodward overspeed protector

The 5439-751 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5439-751
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5439-751 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

The input-output of PID controller and the control implementation of PID controller

The PID controller (Proportional Integration Differentiation) consists of a proportional unit P, an integral unit I, and a derivative unit D.

By setting the three parameters Kp, Ki, and Kd. The PID controller is mainly suitable for systems with basic linearity and dynamic

characteristics that do not change over time. This article first introduces the working principle of the PID controller, followed by the input and

output of the PID controller, and finally introduces the parameter tuning and control implementation of the PID controller. Follow the editor to learn more about it.

The working principle of PID controller
PID controllers are widely used in industrial process control. Approximately 95% of closed-loop operations in the field of industrial automation use

PID controllers. The controllers are combined in such a way as to generate a control signal.

As a feedback controller, it provides control output to the desired level. Before the invention of microprocessors, PID control was implemented using analog

electronic components. But today all PID controllers are processed by microprocessors. Programmable logic controllers also have built-in PID controller instructions.

By using a low-cost simple switch controller, only two control states are possible, such as fully open or fully closed. It is used for limited control applications,

and these two control states are sufficient to control the target. However, the oscillation characteristics of this control limit its use and are therefore being replaced by PID controllers.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5439-751 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5439-751 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5439-751Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.