5439-800 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 5439-800
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5439-800 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5439-800 controller debugger module Motor touch screen WOODWARD

5439-800 Woodward overspeed protector

The 5439-800 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5439-800
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5439-800 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

A Brief Discussion on Three Basic Wind Valve Driver Methods

There are three basic types of air valve drivers: whole step, lightning pool, and subdivision. The key difference depends on the linearity of the

current of the motor electromagnetic coil (i.e. excitation method).

1. Whole step driver
In the entire operation, the same stepper motor can be equipped with both a whole/lightning tank driver and a subdivision driver, but the actual operation

effect is different. The air valve driver excites the two electromagnetic coils of the two-phase stepper motor in a cyclic system according to pulse/direction commands

(setting the current for charging the electromagnetic coil battery). Each pulse

of this type of driver method will cause the motor to move by a basic pitch angle of 1.80 degrees (there are currently 200 pitch angles per circle for a standard two-phase motor).

2. Yuelei Pool Drive

When single-phase electric excitation is applied, the motor drive shaft stops at the entire step position. After receiving the next pulse, if the driver excites the other

phase and maintains the original excitation state, the motor drive shaft will move by one and a half transverse angles and stop in the middle of two adjacent entire step

positions. In this cyclic system, single-phase electricity is applied to the two-phase electromagnetic coils, and then the two-phase excitation stepper motor will rotate using

a lightning pool method of 0.90 degrees per pulse. All whole/cross lightning pool drives can implement whole step and

cross lightning pool drives, which are selected by the dial of the drive dip switch. Compared with the whole step method, the lightning pool method has the advantages

of double high accuracy and less vibration during low-speed operation. Therefore, when applying the whole/lightning pool driver, the lightning pool method is generally used.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5439-800 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5439-800 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5439-800Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.