5464-021 Woodward speed control module

Price:

Product basic information
Manufacturer: Woodward
Model: 5464-021
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5464-021 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5464-021 controller debugger module Motor touch screen WOODWARD

5464-021 Woodward speed control module

The 5464-021 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5464-021
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5464-021 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

d、 Holding torque:

It refers to the torque at which the stator locks the rotor when the stepper motor is powered on but not rotating.

It is one of the most important parameters of stepper motors, and the torque of stepper motors is usually close to the holding torque at low speeds. Due to

the continuous attenuation of the output torque of a stepper motor with increasing speed, and the variation of output power with increasing speed, maintaining

torque has become one of the most important parameters for measuring a stepper motor. For example, when people refer to a 2N.
m stepper motor, unless otherwise specified, it means a stepper motor that maintains a torque of 2N. m.

Common faults and maintenance of stepper motor drivers

Given that many friends are not familiar with how to handle faults in stepper motor drivers, today the editor has listed some common causes and solutions for stepper motor driver failures.
1. Stepper driver malfunction
Reason for malfunction: Electrostatic discharge (poor working environment).

Troubleshooting method: First, connect the PE in the electrical cabinet to the ground. If there is still a fault, the driver module is damaged and needs to be replaced.

2. Motor stalling at high speed
Reason for malfunction: Design issues with the transmission system.

Exclusion method: If the high-speed jog does not cause blockage when the feed rate is 85%, use the line acceleration feature; Reduce the maximum feed rate; Replace the fire torque stepper motor.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5464-021 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5464-021 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5464-021Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.