5500-563 WOODWARD Debugger unit

Price:

Product basic information
Manufacturer: Woodward
Model: 5500-563
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5500-563 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5500-563 controller debugger module Motor touch screen WOODWARD

5500-563 WOODWARD Debugger unit

The 5500-563 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5500-563
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5500-563 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Input/output pins

You can see that there are 14 instructions related to I/O pins in BS-1. The reason for emphasizing this point is

that the input-output pins are the only way for BASIC Stamp to communicate with the outside world. BS-1 has 8 input/output pins

(numbered 0 to 7), and BS-2 has 16 input/output pins (numbered 0 to 15).

These input and output pins are bidirectional, which means that input values can be read from the pins and output through

the pins. The easiest way to send values to a pin is to use the HIGH or LOW command. Using the statement “high 3” can emit a

1 (+5 volts) on pin 3, while using “LOW” will emit a 0 (ground). The third pin here can be selected arbitrarily – you can output level signals to any pin from 0 to 7.

There are many interesting instructions about input and output pins. For example, if you follow the POT instruction to connect a

capacitor in parallel across a potentiometer (variable resistor), the POT instruction can read the potentiometer settings. PWM commands

can emit modulation signals with pulse width. Adding control and driver functions to Stamps is much easier with instructions like this. For

detailed information about language, please refer to the documentation. In addition, books such as Scott Edward”s Programming and Customizing

the BASIC Stamp Computer, which contain a large number of example projects, are also extremely beneficial.

Practical operation of BASIC Stamp

If you want to actually operate BASIC Stamp, it is very easy to get started. All you need is a desktop computer and a BASIC Stamp starter kit.

The introductory toolkit includes a Stamp microcontroller, programming cable, and an application running on a desktop computer that downloads BASIC programs into Stamp.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5500-563 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5500-563 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5500-563Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.