5501-381 Woodward turbine controller

Price:

Product basic information
Manufacturer: Woodward
Model: 5501-381
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5501-381 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5501-381 controller debugger module Motor touch screen WOODWARD

5501-381 Woodward turbine controller

The 5501-381 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5501-381
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5501-381 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Although analog control may seem intuitive and simple, it is not always very economical or feasible. One of the points is that analog

circuits are prone to drift over time, making it difficult to adjust. The precise analog circuit that can solve this problem may be very large,

bulky (such as old-fashioned home stereo equipment), and expensive. Analog circuits may also generate severe heat, and their power consumption is

proportional to the product of the voltage and current at both ends of the working component. Analog circuits may also be sensitive to noise,

and any disturbance or noise will definitely change the magnitude of the current value.
digital control
By digitally controlling analog circuits, the cost and power consumption of the system can be significantly reduced. In addition, many microcontrollers

and DSPs already include PWM controllers on the chip, making the implementation of digital control easier.

In short, PWM is a method of digitally encoding the level of an analog signal. By using a high-resolution counter, the duty cycle of the square wave is modulated

to encode the level of a specific analog signal. The PWM signal is still digital because at

any given moment, the full amplitude DC power supply is either completely ON or completely OFF. A voltage or current source is applied to an analog load in

a repetitive pulse sequence of ON or OFF. When it is turned on, the DC power supply is applied to the load, and when it is turned off, the power supply is

disconnected. As long as the bandwidth is sufficient, any analog value can be encoded using PWM.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5501-381 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5501-381 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5501-381Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.