5501-465 Woodward turbine controller

Price:

Product basic information
Manufacturer: Woodward
Model: 5501-465
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
5501-465 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 5501-465 controller debugger module Motor touch screen WOODWARD

5501-465 Woodward turbine controller

The 5501-465 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 5501-465
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 5501-465 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

The composition of the controller: The motor controller mainly consists of the following parts:

1. The electronic control module includes hardware circuits and corresponding control software.

The hardware circuit mainly includes microprocessors and their ZUI subsystems, monitoring circuits for motor current,

voltage, speed, temperature and other states, various hardware protection circuits, and communication circuits for data

exchange with external control units such as vehicle controllers and battery management systems. The control software implements

corresponding control algorithms based on the characteristics of different types of motors.

2. The driver converts the control signal of the microcontroller for the motor into the driving signal for the power converter,

and achieves isolation between the power signal and the control signal.

3. The PowerConverter module controls the motor current. The power devices commonly used in electric vehicles include

high-power transistors, gate turn off thyristors, power field-effect transistors, insulated gate bipolar transistors, and intelligent power modules.

2、 The working principle of the motor controller is that the motor drives the car forward, and the motor controller drives the motor to work;

The motor controller consists of an inverter and a controller; The inverter receives direct current energy from the battery

and converts it into three-phase alternating current to provide power to the car motor; The controller receives feedback signals such as motor speed to the instrument.

When braking or acceleration occurs, the controller controls the frequency of the frequency converter to increase or decrease,

thereby achieving the purpose of acceleration or deceleration.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 5501-465 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
5501-465 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 5501-465Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.