8234-346A Woodward speed control module
The 8234-346A is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 8234-346A
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions
- Speed Control:
- 8234-346A Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.

-
Motion controllers can be divided into three basic types based on the principle of position control, namely the presence or absence
of detection feedback sensors and their detection devices: open-loop, semi closed loop, and closed-loop motion controllers.
1. Open-loop control motion controller
There is no position detection feedback device, and its execution motor generally uses a stepper motor. The biggest features of this type
of motion controller are convenient control, simple structure, and low price. The displacement command signal flow issued by the motion controller is unidirectional,
so there is no stability issue. However, due to the lack of feedback correction for mechanical transmission errors, the position accuracy is generally not high.
2. Semi closed loop control motion controller
The position feedback adopts a corner detection element, which is directly installed at the end of the servo motor or screw. Due to its position feedback control,
high positioning accuracy can be achieved, and most mechanical transmission components are not included in the closed-loop system, thus obtaining relatively
stable control characteristics. Mechanical transmission errors such as lead screws cannot be corrected through feedback, but software fixed value compensation can be used to appropriately improve their accuracy.
3. Fully closed-loop control motion controller
By using detection elements such as gratings to detect the position of the controlled unit, transmission errors in the entire mechanical transmission chain from the
motor to the controlled unit can be eliminated, resulting in high static positioning accuracy. However, due to the nonlinear friction characteristics, rigidity, and clearance
of many mechanical transmission links within the entire control loop, and the large dynamic response time (compared to electrical response time) of the entire mechanical
transmission chain, it is difficult to calibrate the stability of the entire closed-loop system, and the design and adjustment of the motion controller are also quite complex.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 8234-346A Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 8234-346A Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 8234-346ASuitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
5463-410 Woodward overspeed protector,
5462-292 Woodward Ship Spare Parts,
9700-1200 Woodward overspeed protector,
5463-473 C Woodward overspeed protector,
5441-637 Woodward overspeed protector,
5466-341 Woodward overspeed protector,
5415-625 Woodward overspeed protector,
8440-2050 Woodward turbine controller,
9905-970 Woodward speed control module,
5501-471 Woodward Ship Spare Parts,
ASML 859-9608-001 RETICLE, SERIES 92, 4X, FOCUS GRATING
ASML 4022.486.57153 ATRS XT2 SSY Coil Assembly SVG
19018 ASML STEPPER BARCODE READER, 4022.436.5298 4022.454.8556
ASML PID 250 Board
ASML 4022.428.10970 Voltage Current PCB Card 4022.428.1097 PAS 50002500
ASML Laser Mat: 4022.427.42562 Class 3B ( NdYVO4) ) 532nm Laser Module
29827 ASML CARDCAGE ASSY, IRCB 4022.671.87331
Philips 9406.217.1100 Processor PCB Card PC 171100 ASML PAS 50002500
4022.476.01371 PSU 270V 1.9A 3HE 12TE
ASML Mat: 4022.455.78511 17mW Red Laser Module in original carry case
Philips PG 3301 COM 4A Processor PCB Card ASML 4022.422.7999 PAS 50002500
ASML 4022.634.20691 PAAC 45020 POWER SUPPLY,
ASML 4022.634.14744
Sankyo Robot Controller SC3150 ASML 4022.636.32221
ASML QIOPTIQ PHOTONICS 4022.651.50093 YS ILLUMINATION LPPS IPG YLM-150-WC-QQ
ASML 851.0618.003 Stepper Library Brake Working
ASMLSVG 4022.471.5457 Power Amp. Controller
1PCS ASML RH-PU-Mk3 PN 4022.631.24391 90days warranty via DHL or FedEx
LAM Research (LAM) SVGASML 879-0014-002 Vacuum Chuck
ASML 200mm SWS E-CHUCK TO STONE FLEX ASS’Y (LONG) 4022.456.12163
ASML 859-9633-001 RETICLE FOCUS SEM



Reviews
There are no reviews yet.